How to Program Key Fob for Pontiac G6?

Assuming you have a Pontiac G6 with remote keyless entry, programming the key fob is a relatively simple process. Start by sitting in the driver’s seat and making sure all doors are closed. Then, insert the ignition key and turn to the “On” position without starting the engine.

Next, press and release the “Lock” button on the key fob. Within five seconds, press and hold down the “Unlock” button until you hear a chime. At this point, your key fob should be programmed and ready to use.

  • Open the door of your Pontiac G6 and sit in the driver’s seat
  • Insert the key into the ignition and turn it to the “On” position without starting the engine
  • Press and release the “Lock” button on your key fob
  • You should see a light on your dash that indicates the car is locking all doors
  • Press and hold down the “Lock” button for about two seconds until you hear a beep from your car’s speakers
  • This means that your car has accepted the new programming and you can now release the button

How Do You Program a Keyless Remote for a Pontiac G6?

If you need to program a keyless remote for your Pontiac G6, there are a few things you’ll need to do. First, find the owner’s manual for your car. This should have instructions on how to program the remote.

If not, you can also find this information online or in a service manual. Once you have the instructions, you’ll need to get the code from your local dealership or an automotive locksmith. Once you have the code, follow the instructions in your owner’s manual or online to program the remote.

If you’re still having trouble, there are some other things you can try. You can use a universal remote that is compatible with your car. Or, if your car has an infotainment system, there may be a way to program the remote through that system.

If all else fails, you can always take your car to a dealer and have them program the remote for you.

How Do You Program a Key Fob for a 2009 Pontiac G6?

If you need to program a key fob for your 2009 Pontiac G6, you can do so by following these simple steps: 1. Start by insert the key into the ignition and turn it to the “On” position. 2. Press and release the learn button on the drivers door twice within 5 seconds.

The doors will lock and unlock to indicate that you are in programming mode. 3. Using your working key fob, press and hold the LOCK button for 4 seconds. Then press and hold the UNLOCK button for 4 seconds.

This will program the new key fob.

Read Also:  Is Amc Popcorn Gluten Free?
4. Repeat step 3 for any additional key fobs that you need to program. 5. When you are finished programming, turn the ignition off to exit programming mode.

Can You Program a New Key Fob Yourself?

If you have lost your car keys, or if they have been stolen, you may be wondering if you can program a new key fob yourself. The answer is yes, in most cases you can. Here are a few things to keep in mind when programming your new key fob:

1. Check your owner’s manual – In some cases, the process of programming a new key fob may be different for different makes and models of cars. It’s always best to check your owner’s manual first to see if there are any specific instructions for your vehicle. 2. Have two working keys – In order to program a new key fob, you will need two working keys for your car.

If you only have one working key, you will not be able to program a new one. 3. Use the same type of key – If you are using an aftermarket key fob, make sure that it is the same type as the original (i.e., transponder vs non-transponder). Otherwise, it may not work properly with your car’s ignition system.

How Do You Program a 2008 Pontiac Key Fob?

If you’re looking to program a 2008 Pontiac key fob, there are a few things you’ll need to keep in mind. First, you’ll need to have the correct key fob for your vehicle. You can usually find these at your local dealership or automotive parts store.

Once you have the correct key fob, you’ll need to locate the programming button. This is usually located near the battery on the back of the key fob. Once you’ve found the button, simply press and hold it until the light on the key fob begins flashing.

At this point, you can use your Pontiac’s remote start system to program your key fob.

Pontiac G6 2008 Remote control Programming

2009 Pontiac G6 Keyless Remote Programming

If you’re the owner of a 2009 Pontiac G6, you may be wondering how to program your keyless remote. Here’s a quick guide to help you out. First, sit in your car with the doors closed and the engine off.

Then, press and hold the “Lock” button on your remote for about five seconds. Next, press and release the “Panic” button. Finally, press and release the “Lock” button again.

If everything was done correctly, your car should now have a new code that will work with your remote. If not, repeat the steps until it does.

How to Program a 2006 Pontiac G6 Key Fob With Remote Start

If you’re looking to add remote start to your 2006 Pontiac G6, you’ll be happy to know that it’s a relatively easy process. You’ll need to purchase a remote start kit and have it installed by a qualified technician. Once the installation is complete, you can program the key fob yourself using the following steps:

Read Also:  Can Bondo Get Wet?


1. Sit in the driver’s seat and close all doors. 2. Insert the key into the ignition and turn it to the “On” position without starting the engine. 3. Press and release the “Lock” button on the key fob.

4. Within five seconds, press and hold down the “Lock” button for three seconds. The parking lights should flash to indicate that programming mode has been activated. 5. Within 20 seconds of activating programming mode, press and release the “Lock” button on the remote start kit’s transmitter twice (within one second).

The parking lights will flash again to confirm that programming was successful.

How to Program a Pontiac Key Fob

If you have a Pontiac car with remote keyless entry, programming the key fob is a simple process that can be completed in a matter of minutes. Here’s how to do it: 1. Sit in the driver’s seat and close all doors.

2. Insert the key into the ignition and turn it to the “On” position (but don’t start the engine). 3. Within five seconds, press and release the “Lock” button on the key fob. You should hear a chime to indicate that programming mode has been activated.

4. Within 10 seconds, press and hold the “Lock” button again for two seconds. The doors will lock and then unlock to confirm that the new key fob has been programmed successfully.

Pontiac G6 Key Fob Not Working

If you’ve been having trouble with your Pontiac G6 key fob not working, there are a few things you can try to troubleshoot the issue. First, check the battery in your key fob to make sure it’s still good. If the battery is dead, replace it and see if that fixes the problem.

If not, there could be an issue with the wiring in your key fob or with the receiver in your car. You can try resetting both the key fob and the receiver by disconnecting their batteries for a few minutes, then reconnecting them. If that doesn’t work, you’ll need to take your car to a dealership or locksmith to have them take a look at it.

Conclusion

If you need to program a key fob for your Pontiac G6, there are a few things you’ll need to do. First, find the right key fob. You can usually find these online or at your local automotive store.

Once you have the key fob, you’ll need to program it to your car. To do this, first put the key in the ignition and turn it on. Then, press and hold the “Lock” button on the key fob for about three seconds.

After that, press and release the “Panic” button on the key fob. Finally, turn off the ignition and remove the key. Your new key fob should now be programmed and ready to use!

John Adams

John Adams is the founder of this site, howtodothings101. In his professional life he's a real estate businessman and hobbyist blogger who research blogs about what it takes to make your home feel like yours with all new furniture or electronics for example but also security systems that will keep you safe from break-ins! He created howtodothings101 correctly so other people can organize their homes too by following expert advice given throughout each article on here

Recent Posts