How Much Does a 4L60E Weight?

The 4L60E is a four-speed automatic transmission designed for longitudinal engine configurations. It has a maximum torque capacity of 440 lb-ft and is rated to handle engines with up to 345 hp. The 4L60E was introduced in 1992 as a replacement for the earlier 700R4 transmission.

It was first used in GMC and Chevrolet trucks, but is now also used in a variety of other makes and models. The 4L60E is a popular transmission choice for street performance and racing applications due to its strength and relatively low cost. The 4L60E weighs approximately 145 pounds without the torque converter.

If you’re looking to swap out your old transmission for a 4L60E, you might be wondering how much it weighs. The answer may surprise you – the 4L60E weighs in at a whopping 145 pounds! That’s quite a bit heavier than your average sedan, so keep that in mind when considering a transmission swap.

But if you’re looking for increased performance and durability, the 4L60E is definitely worth the extra weight.

How Much Does a 4L80E Weigh?

A 4L80E transmission weighs approximately 119-lbs. A 4L80E is a heavy duty, four-speed automatic transmission that was introduced in the early 1990s. The 4L80E is a General Motors (GM) designation for a longitudinally mounted, four-wheel drive truck with an 8-cylinder gasoline engine and an automatic transmission.

The 4L80E has been used in GM trucks and vans since 1991. The 4L80E is a heavy duty, four-speed automatic transmission that was introduced in the early 1990s. It was designed for use with RWD vehicles equipped with 8-cylinder engines.

The 4L80E is capable of handling up to 440 ft·lbf (597 N·m) of torque and 1,000 hp (746 kW). The transmissions weight varies depending on whether it is equipped with an oil cooler or not. An oil cooler will add approximately 15 lbs to the overall weight of the transmission.

Read Also:  How Much Does a Bag of Rice Weigh?

How Much Does a Chevy Truck Transmission Weigh?

The average weight of a Chevy truck transmission is between 150 and 200 pounds. This weight can vary depending on the model of the truck and the year it was manufactured. The transmission is one of the heaviest parts in a vehicle, so it is important to know its exact weight when planning to tow or haul anything with your truck.

What Size is a 4L60E Transmission?

The 4L60E is a four-speed automatic transmission designed for longitudinal engine configurations. The 4L60E is the evolution of the Turbo Hydramatic 700R4, which was originally produced in 1982. The 4L60E was introduced in 1992 and served as GM’s primary rear-wheel drive automatic transmission until 1997, when it was replaced by the more robust 4L80E.

The 4L60E is an externally regulated 30 spline electronic transmission with a maximum torque capacity of 340 lb.-ft. It has a cast aluminum case and integrated bell housing.

The overall length of the transmission is 22.75 inches (577 mm). The width of the case is 13.56 inches (345 mm) and the height is 10 inches (254 mm).

How Much Does a 4L65E Weigh?

The 4L65E is a four-speed automatic transmission designed for longitudinal engine configurations. It is an evolution of the Turbo-Hydramatic 700R4, originally produced in 1982. The 4L65E was introduced in 1997 and featured electronic controls and an increased torque capacity of 360 lb·ft (488 N·m).

It is manufactured by General Motors at their Willow Run Transmission plant in Ypsilanti Township, Michigan. The 4L65E has a case length of 11.375 inches (289 mm) and a diameter of 13.56 inches (345 mm). It weighs approximately 143 pounds (65 kg).

How Much Does a 4L60E Weigh With Fluid

When it comes to the weight of a 4L60E transmission, there are a few things that you need to take into account. The first is the weight of the transmission itself, and the second is the weight of the fluid inside. The transmission itself weighs in at around 150lbs, but when you add in the weight of the fluid, it brings the total up to around 200lbs.

Read Also:  How to Remove Spare Tire From Ford F150 Without Key?


Now, this may not seem like a lot, but when you factor in all of the other components that are found in a car (engine, wheels, etc.), it can start to add up quickly. So, if you’re looking to save some weight on your vehicle, swapping out your 4L60E for a lighter model may be a good option.

How Much Does a 4L80E Weight

The 4L80E is an automatic transmission that was introduced in the early 1990s. It was designed for use in light and medium duty trucks. The 4L80E is a heavy duty transmission that can handle up to 860 ft-lbs of torque.

It has a maximum input torque of 440 ft-lbs and a maximum output torque of 830 ft-lbs. The 4L80E weighs approximately 175 lbs.

How Much Does a Th400 Weigh

How Much Does a Th400 Weigh? The answer to this question is not as simple as it may seem. There are a few factors that can affect the weight of a TH400 transmission, such as whether or not it has an aluminum case, and what kind of internals it has.

A stock TH400 with an iron case and standard internals will weigh around 140lbs. If the transmission has an aluminum case and aftermarket internals, it could weigh as little as 120lbs.

Conclusion

The 4L60E is a popular automatic transmission that was first introduced in the early 1990s. This transmission is often found in GM vehicles, and it is known for being reliable and durable. The 4L60E has a few different versions, and the weight of each one varies slightly.

The most common version of this transmission weighs around 140 pounds.

John Adams

John Adams is the founder of this site, howtodothings101. In his professional life he's a real estate businessman and hobbyist blogger who research blogs about what it takes to make your home feel like yours with all new furniture or electronics for example but also security systems that will keep you safe from break-ins! He created howtodothings101 correctly so other people can organize their homes too by following expert advice given throughout each article on here

Recent Posts